Lease of machines and technology
Building machines
- EXCAVATOR CATERPILLAR 301.8C (lease including operator/ mechanic)
Technical parameters:
Max. excavation depth |
2.3 m |
Max. reach |
3.8 m |
Scoop volume |
0.03 - 0.06 m3 |
Weight |
1785 kg |
Motor power output |
14 kW |
Accessories:
- 2x 25m pressure hose - Compressor Gardner Denver DLT0206
- 2x jackhammer
Technical parameters:
- Rotating laser HILTI PR 2-HS
Accessories:
- Crank tripod
- Measuring plank
Technical parameters:
Laser functions |
Manual slope measurement, horizontal alignment |
Operating reach with laser receiver (diameter) |
2 - 600 m |
Laser category |
<4,85 mW, 620 - 690 nm, category 2 (IEC 60825-1:2007), category II (FDA CFR 21 article 1040) |
Self-leveling range at room temperature |
±5 ° |
Accuracy |
±0.5 mm per 10 m |
Slope measurement type |
individual |
IP protection class |
IP 66 (IEC 529) |
Operating temperature range |
-20°C through + 50 °C |
Operating time with Li-ion accumulator |
30 hours |
Accumulator type |
Li-ion |
Dimensions (L x W x H) |
200 x 200 x 230 mm |
Tripod thread diameter |
5/8 in |
Temperature range at storage |
-25°C through +60 °C |
Leveling system |
fully automatic |
Water insulation shoot-application machines:
- WIWA DUOMIX PU 460 (lease including operator/ mechanic)
Accessories:
- Hose 17m + 10m
- Shooting gun
- Compressor Gardner Denver DLT02206
Technical parameters:
Mixing ratio |
1:1 (1:1 to 10:1 possible) |
Max. Fluid Pressure |
240 bar / 3480 psi |
Gear ratio |
30:1 |
Output per a cycle |
194 cm3 / 0.05 gal |
Max. Inbound Air Pressure |
8 bar / 120 psi |
Max. Application Rate |
12 ltr./min. / 3,1 gal./min. |
Max. hose length |
138 m / 453 ft. |
Accessories:
GRACO E-10 (lease including operator/ mechanic)
- Hose
- Shooting gun
- Compressor UNM 410-10-50W
Milling machines:
- Husqarna PG 680 (lease including operator/ mechanic)